The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Nazzcu · 03-27-2010, 10:16 PM

Started the body work. I am taking it in pieces, cab and bed. Removed the trim and pen stripes, roughed up the factory paint with 180, and cut the right rear be panel out for replacement. This is my first time using epoxy primer and I do not like spraying the stuff. I could not get a good wet coat on it spraying a 1.6 tip.

Finished with PPg epoxy primer.

03-27-2010, 10:16 PM	#2
Nazzcu Registered User Join Date: Feb 2010 Location: Tuscaloosa Alabama Posts: 46	Re: My 87 Started the body work. I am taking it in pieces, cab and bed. Removed the trim and pen stripes, roughed up the factory paint with 180, and cut the right rear be panel out for replacement. This is my first time using epoxy primer and I do not like spraying the stuff. I could not get a good wet coat on it spraying a 1.6 tip. Finished with PPg epoxy primer. Last edited by Nazzcu; 03-27-2010 at 10:16 PM.