The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Kiwi · 04-02-2010, 02:55 AM

Anybody know what the initial and total advance timing specs were for a stock 350 4V V-8 fit to a 1971 Chevrolet C10 truck?

In addition, with regards to the stock cast-iron cylinder heads fit to a 1971 C10 with a 350 V-8 ...

1. What was the cc size of the combustion chambers (I think that it was 76 cc which yielded a lackluster 8.2:1 compression ratio)

2. What was the size of the intake runners on the cylinder heads (I'm guessing that it was somewhat near 180 cc's)

04-02-2010, 02:55 AM	#1
Kiwi Registered User Join Date: Mar 2010 Location: Los Angeles, California Posts: 81	Distributor question Anybody know what the initial and total advance timing specs were for a stock 350 4V V-8 fit to a 1971 Chevrolet C10 truck? In addition, with regards to the stock cast-iron cylinder heads fit to a 1971 C10 with a 350 V-8 ... 1. What was the cc size of the combustion chambers (I think that it was 76 cc which yielded a lackluster 8.2:1 compression ratio) 2. What was the size of the intake runners on the cylinder heads (I'm guessing that it was somewhat near 180 cc's)