Quote:
Originally Posted by joe231
Did you figure out the bed cross sill problem?
I ran into the same thing on our '66.
You probably have cross sills to fit the '60-62 frame. That was our problem and none of the holes lined up. Are the rear most holes too wide to even sit on the frame?
Trucks looking good BTW
|
Quote:
Originally Posted by srsummers
Hey Joe231
No, I haven't figured it out yet, but it sounds like you just did. Yes, the rear brackets are too far apart. The fleetbed was already on the truck when I got it so I don't know the year. I'll let you know what I find.
|
Quote:
Originally Posted by joe231
Cool
if you aren't too concerned about it you could drill new holes in the sills and relocate the rear brackets to fit. If it bothers you, you can replace all the cross sills.
Mar-K.com makes new ones that are high quality and made in the USA (Oklahoma city in fact)
and they are a vendor here....
|
Looking good!! With the bad, I had exact same issue, but reversed on my 62. The clue should have been the back up lights..lol.. But I just replaced the sills. It was easier and fairly inexpensive for the new ones. Bonus, everything lined up after that..