|
Re: HEI Ignition Problem
UPDATE
went outside today to fix the advace wieghts bushings (did not go smooth at all) a five minute fix turned into a 20 minute headache because the bushings would not fit into the hole on the advace weights as easy as you may think. or i thought
next i put the coil in the cap screwed it down and then i put the coil cover on and was screwing it down (everything going well) then like a lighting bolt my(BRAND NEW) cap that i bought the other day cracked i dont know if the screw was going in at a angle or what. but all i could do is throw my hand up in the air and go in the house.
i dont even get mad anymore with all the problems i have been having. i should have know somthing would happen.
so i guess the only thing i need is a new cap again.
__________________
1970 2wd  3/4 ton- 2004 crate 350 thorley tri-y headers-edelbrock performer eps manifold 600cfm performer carb, crane cams energizer cam,lifters, dual 2.5 magnaflows, mallory HEI, powermaster 140 amp altenator, griffen aluminum radiator.(8 MPG  )
|