The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 5500 · 05-05-2010, 06:06 PM

It should be alright. As long as the new race goes in tight you won't have to use any lock tite. I would use a brass punch to put the new one in or the correct tool if you have one. Pack some grease in the new bearing to pre lube it. Good luck.

05-05-2010, 06:06 PM	#77
72 5500 Registered User Join Date: Apr 2010 Location: Canaan Ct Posts: 105	Re: Medium Duty trucks It should be alright. As long as the new race goes in tight you won't have to use any lock tite. I would use a brass punch to put the new one in or the correct tool if you have one. Pack some grease in the new bearing to pre lube it. Good luck.