The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Whats the easiest way to drop the front end??

tcb-1 · 05-06-2010, 09:11 PM

if your handy with a welder and a torch or plasma, you can drop the front hard if you cup the front lower control arms and throw a set of bags with Schrader valves on it. cheap, but probably not laying frame yet. get a set of spindles if you can blow the dough. I have MGaughey 2.5" drop spindles and I'm happy with them. however, there are several other vendors that make quality drop spindles.

laying frame isn't cheap!

05-06-2010, 09:11 PM	#5
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Whats the easiest way to drop the front end?? if your handy with a welder and a torch or plasma, you can drop the front hard if you cup the front lower control arms and throw a set of bags with Schrader valves on it. cheap, but probably not laying frame yet. get a set of spindles if you can blow the dough. I have MGaughey 2.5" drop spindles and I'm happy with them. however, there are several other vendors that make quality drop spindles. laying frame isn't cheap! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 05-06-2010 at 09:12 PM.