Re: Halfbreed - GMC Z71 + IH Extd Cab
Does anyone have a suggestion for a make/model of car/truck that would have a rubber fuel fill hose that has a sharp 90 degree bend in it? I need to adapt something off another make/model to help me out on my project.
The stock GMC fill pipe is mostly a straight shot into the tank but now that I have lowered the tank I need to dodge the frame rail.
Thought I'd ask for suggestions before I just start wandering around a U-pullit yard with my sawzall.
Edit: I found a picture that shows what my situation is. It shows the stock position of the tank. There is just enough room on a GM truck for the filler pipe to do a straight shot at a slant down into the tank (dotted yellow line). But I have lowered the tank 2.5" and now the inlet is buried against the inside of the frame rail. I want to try and turn a 90* forward and then another 90* back out to the side. So I need a rubber piece like the black line in the picture.
Last edited by sparkydog; 05-13-2010 at 10:38 AM.
|