The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

csa daddy · 06-10-2010, 11:05 AM

an here is a pic after i cut a shortened the chassis mind you nothing is bolted down right now

im in the process of z'ing the frame so be kind on the critisim of the welds but advice is always welcome.

when im done this will all be plated in with a peice of 1/4" plate an probly be boxed back to the rear spring hangers

these lower spring mounts are keeping me from laying out so i have to re work te lower control arms.

i plan to take a peice of 8 inch pipe an recess it into the arm in order to drop the bag down almost 3 inches

stay tuned for further up dates im working on the z now as much as i can to get it done but the heat is working against me.

06-10-2010, 11:05 AM	#2
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: 87 crew cab shortbed dually an here is a pic after i cut a shortened the chassis mind you nothing is bolted down right now im in the process of z'ing the frame so be kind on the critisim of the welds but advice is always welcome. when im done this will all be plated in with a peice of 1/4" plate an probly be boxed back to the rear spring hangers these lower spring mounts are keeping me from laying out so i have to re work te lower control arms. i plan to take a peice of 8 inch pipe an recess it into the arm in order to drop the bag down almost 3 inches stay tuned for further up dates im working on the z now as much as i can to get it done but the heat is working against me.