Here is my newest one, I bought this 72 GMC 4X4 last November and spent the last 6 months tearing it apart, sanding it down to bare steel and painting it. I took the bed off, removed every part inside and out including all the glass. I bought just about one of everything in the Classic Parts catalog and some from LMC, replaced the brakes, wheel cylinders, calipers, etc. It was a lot of work but I am very happy with it now! It started out as a brown turd covered with 5 gallons of bondo, I literally filled a five gallon bucket with all the bondo that was on it, whoever did the body work in the past didnt even try to hammer out the dents, they just filled them up with bondo. It has a rebuilt 350, TH350 trans and came with two transfer cases. The PO installed a 4 inch lift kit in it, it is just the right height. It's going to be a fun truck. Here's a couple before and after pics.
AFTER,
