The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - $250 1964 c-10

NebulisNotion · 06-11-2010, 06:59 PM

Okay, thank you very much! I totally understand the technique. Have another question, though; do I use a sealer on the glass or the pinchweld (i.e. on the gasket or glass/pinchweld should i apply a sealer, or does the gasket seal the glass alone?) It is the original windshield. Also wanted to clarify that I should apply lube to the pinchweld seam after string is wrapped around the gasket inside the pinchweld seam. Thanks again!

06-11-2010, 06:59 PM	#27
NebulisNotion Registered User Join Date: May 2010 Location: Sacramento, CA Posts: 9	Re: $250 1964 c-10 Okay, thank you very much! I totally understand the technique. Have another question, though; do I use a sealer on the glass or the pinchweld (i.e. on the gasket or glass/pinchweld should i apply a sealer, or does the gasket seal the glass alone?) It is the original windshield. Also wanted to clarify that I should apply lube to the pinchweld seam after string is wrapped around the gasket inside the pinchweld seam. Thanks again!