Re: Project 67 DRGNWGN - 67 Burban!!
hey Kev look'n good the ony thing is that on you cupped LCA you need to remove the rest of the bump stop bracket ( trust me) and make sure the top edge of he welded in cup is Smooooth...when the bag has air in it there will be some tention against the top edge and it will rub a hole in the bag ( I built the same cup)
also move your track bar to the back of your trailing arm..you need to make that bar as long ad you can because of the amount of travel...do what I did tack it up than bring it to your buddy to weld it up..the longer the bar the less side travel
CHANGE OUT your wires I looked at your pics and it maybe ok today but your going to have an issue later...the last thing you want is to try to get under it and fix something later ( grounds are ok)...
don't forgrt the foil beanie trick either...lol
Keep it up looks good
|