The cab is back on. bolts throught the original holes. The rear of the cab uses the original 54 rear cab mounts drilled into the frame.
Fender fits good considering the wheels are 2 inches wider then stock.
NOW the problem.
Because of the engine, steering box, and frame the cab is sitting 1.5 inches forward of its correct location. Tuesday I will photgraph the before fender mod and then after. I have never liked the out of round look of the stock fender anyway. If you are going to use this chassis swap its better to go higher with the mounts and go for the 4x4 look. My truck is lower then stock and if i flip the rear axle I will be 5 inches lower