The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

msgross · 06-27-2010, 10:00 PM

those are about 25% rotted... I plated mine (had to replace the really rotten one) and then re-drilled the hole with a metal hole saw.

First two pics are the one's that I replaced, next one is plated on the bottom... last pic was the "so-so" 2nd pic removed...

There is a board vendor selling new one's or plenty of guys part trucks on here..

06-27-2010, 10:00 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: cab support hole those are about 25% rotted... I plated mine (had to replace the really rotten one) and then re-drilled the hole with a metal hole saw. First two pics are the one's that I replaced, next one is plated on the bottom... last pic was the "so-so" 2nd pic removed... There is a board vendor selling new one's or plenty of guys part trucks on here.. Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 06-27-2010 at 10:02 PM.