|
Re: 85 burb meets 6.0 lq4
Well...that motor is brand new.
For a dirty motor....I use Simple Green. Protect what you don't want to get wet, the pre-wet any plastic areas before applying (SG can stain at 100%), saturate the metal areas with simple green, let set...then hose off with high pressure. Really bad spots may take a 2nd application or even a little scrubbing.
__________________
Kurt -
'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...
my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
|