little bit more progress to report....got the guages in, they are autometer sport comp....im working on making a backing plate to attach to the factory bezel, more on this later...drilled and tapped some bosses on the block, so i could add adels, to keep the wiring neat, and tucked in... also made a mounting plate for the ECM/TCM, so i could get started terminating the wires..the TCM mounting holes were to big for 10-32 screw, so i reamed the holes, and added proper bushing..the ECM already had proper hole size to tap to a 10-32, so i taped them, so i could mount everything...the wires that are off to the side (not terminated) will be integrated into the factory harness with OE weatherpack connectors, so it will be a simple 'plug in' deal.. and also make eng/trans removal easy (should you need to)...
