[Thealien]

I was using a simple on off toggle for the off/on

I was using a simple momentary toggle on/off/on for the set/coast and resume/accel functions. While testing I noticed that while I was getting a full 12 volts to the set/coast or resume/accel depending on which direction I was pushing the on/off/on switch. Upun further testing I noticed the opposing side was also getting 3-4 volts. I guess the cheap switch was malfunctioning (rang out with an ohm meter fine?). I removed the resume/accel wire from the switch and now the set/coast functions perfectly. I either need to find a quality on/off/on switch or I am probably just going to get 2 momentary toggle or pushbutton switches, one for each function. For now having the set/coast function working proves that my VSS and TCC sw are both operational.