The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

craiger · 07-23-2010, 05:08 PM

there are two wires to hook up when installing a brake controler both are under the hood. remove the fuse box cover and there are two studs at the front fuse box. there are two wires with eyelits criped on the them they are tapped to other wireing harness on each side of the fuse box. one wire is for the brake controler and the other is to charge the battery of your trailer it goes right back to the trailer plug. for that one you will have to intall a 40A fuse in the correct location in the fuse box. connect both wires to the correct stud and you will have no problem.

happy towing.

as always if you have any concerns stop and ask you local dealer. they should be happy to help.

07-23-2010, 05:08 PM	#3
craiger Registered User Join Date: Aug 2007 Location: chilliwack bc Posts: 4	Re: 07 silverado brake controller help there are two wires to hook up when installing a brake controler both are under the hood. remove the fuse box cover and there are two studs at the front fuse box. there are two wires with eyelits criped on the them they are tapped to other wireing harness on each side of the fuse box. one wire is for the brake controler and the other is to charge the battery of your trailer it goes right back to the trailer plug. for that one you will have to intall a 40A fuse in the correct location in the fuse box. connect both wires to the correct stud and you will have no problem. happy towing. as always if you have any concerns stop and ask you local dealer. they should be happy to help.