Re: 56 pro touring build
After cutting out the frame and fitting the boxing plates (they came a little short towards the rear from the factory) The c notch was fit and welded in from the inside to the frame. The boxing plate was fit (not perfect around the c notch) and then welded in as well. We did not weld in the sides yet as we wanted to put the frame on a rotisserie first. (We copied Kabwe. He said that it is the greatest thing, and he is right. This is well worth it and will make your job 1000% easier. Dont hesitate just do it. Thanks Kabwe!!!!) A weld is always easier when it can be performed on a horizontal plane.
|