To build an adjustable panhard bar, you'll need a piece of DOM tube for the length, a piece of DOM that will work with the bushings on the fixed end, a bushed rod end on the adjustable end, and a threaded bushing that matches the threaded rod end to weld in the end of the long tube. If that isn't understandable, take a look at the ones from CPP.
Sometimes you can remove undercoating with a little heat from say a propane torch and a putty knife. Or just a putty knife or a gasket scraper may work also. Aircraft paint stripper works sometimes too.
Quote:
Originally Posted by chev-obsession
ill have to get the "how to" from some one.
also whats the best way to remove undercoating??
|