Re: 5 speed trans choices
Quote:
Originally Posted by LockDoc
-
Also take into consideration the fact that there are two major sizes of transmission locator holes in the bell housings, 4 11/16" and 5 1/8". If you have a large hole bell housing you may need one of these adapter rings depending on the size of the input bearing retainer on your trans. Very important you have a snug fit on this.
http://dennymac.com/mod.php?mod=user...103&page_id=54
Some good info here too...
LockDoc
|
I knew about the differences with the small and large holes but that page had some great references on how to tell bell housings apart and the different types. Now I know what clutch size I have base on the bell housing.
|