The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Clyde65** · 10-08-2010, 06:23 PM

There ya go, now I warped you properly. yes 4.8L

Yes I got it from North Texas LKQ and it cost 650.00 It had everything but the harness, PCM and Alternator. I could have gotten them but I already bought a motor with all that before and it turned out to be a boat anchor so I sent the boat anchor back.

Right now 2008 4.8 is going for 800 with 10K miles. Now the demand is up I see. The 5.3's are going for 1K-1500.00 depending on mileage and this is also without accessories, you would need to call and ask.

2005 4.8 with 100K runs $400.

10-08-2010, 06:23 PM	#23
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: WIW 1/2 ton CCSB There ya go, now I warped you properly. yes 4.8L Yes I got it from North Texas LKQ and it cost 650.00 It had everything but the harness, PCM and Alternator. I could have gotten them but I already bought a motor with all that before and it turned out to be a boat anchor so I sent the boat anchor back. Right now 2008 4.8 is going for 800 with 10K miles. Now the demand is up I see. The 5.3's are going for 1K-1500.00 depending on mileage and this is also without accessories, you would need to call and ask. 2005 4.8 with 100K runs $400. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 10-08-2010 at 06:24 PM.