The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FnLow69 · 10-17-2010, 11:53 PM

Well I got the crossmember finished today. So here are the pictures.

Ends capped...

Rack and pinion notched for clearance...

Rack mounts....

Tacked in place...

Lower control arm spacers (i didnt make these) welded in place...

And all DONE!

Justin

10-17-2010, 11:53 PM	#24
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Well I got the crossmember finished today. So here are the pictures. Ends capped... Rack and pinion notched for clearance... Rack mounts.... Tacked in place... Lower control arm spacers (i didnt make these) welded in place... And all DONE! Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:34 PM.