Re: Help me put together a good 350 combo for 375-400 hp.
It will be tight for that budget, but ... for strictly street, and not needing top end.....
I'd do the Edelbrock 170cc E-tec heads (I believe the are $1200),
a Vortec airgap intake is roughly $375
Then to do it right, a hydraulic roller in the .. ohhh roughly 235@ 0.050 range assuming your building 9.5 to 10.2:1 comression, an dput lift at .58ish. 1-5/8" long tube headers
that will probably be a deal breaker with cam / good hydraulic roller lifters / pushrods / springs and a good roller rocker being around $1100
I'm always saying HEADS is where the power is made. But, the cam is the brains of how you use those heads. I won't build a flat tapper motor, not with todays oils and the performance benefits of a roller (solid or hydraulic).
But,, that's just my 2¢
__________________
Still playin with trucks, even at my age!
When you're dead, it's only a problem for the people around you, because you don't know you're dead.
.....It's kinda the same when your STUPID.
I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.
|