View Single Post
Old 12-18-2010, 10:43 PM   #63
884x4Sub
p p pullin'
 
884x4Sub's Avatar
 
Join Date: Apr 2008
Location: oshawa ontario
Posts: 373
Re: My '69 Chevelle/Winston cup car

Talked to the Race Shop about doing the front end of the car they said they are moving the shop to a new (nearby) building but wouldnt be able to get to the car until early Feb!...not good.

The guy who is going to do the mods to the roll cage ran a Late Model for years and he came over to look at the front end....made some measurements and came up with what I need for a road race type set up...just need to change the left side upper control arm....went up to the Race Shop and they had a couple real close to what I need.....Heres a pick of a bunch of uppers and lowers I had looking for one that would work.....there is about $400 in parts in the pics with most of it in the lowers....note the trick black "slugs" that allow you to move the arm fore and aft without buying a new arm

__________________
doug
884x4Sub is offline   Reply With Quote