The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

addicted2dunes · 01-01-2011, 10:29 PM

Welp I've decided it's time for my baby to go to a new home, once again. This 72 Jimmy started life as a 4x4. I built a 2wd frame for it (shortened longbed frame) and notched it in the rear. The windshield frame has been chopped 6", the passenger side door has been started on the process of meeting even with the bed, the passenger taillight has been filled, side markers were filled, and the truck now has a 67 front clip. Basically it is a rolling body and frame. THERE IS NO RUST ON THIS VEHICLE. The rockers were starting to show signs of rust and were replaced about 5 years ago. All the front steering parts are new, but are now weathered and surface rusted. THE VEHICLE IS REGISTERED! I have always kept it up to date on it's registration but it hasn't driven in about 7 years. This would be a fun project for someone to play with, good base. If you'd like you could put a new windshield frame and passenger door and almost be back to original.

Parts included:
Tub
Almost perfect GMC tailgate
Brand new (stock) windshield
2 sets of stainless windshield trim
Original owners manual
All complete 67 front clip, hood needs a little work (couple dents), new front fenders, and steel grill trim (not pictured)
Repair section for rear of bed on driver's side (not pictured)
Shortened 2wd longbed frame
All new steering included PS box
Custom front bumper that hides behind roll pan
Brand new red poly body mounts
And some other odds and ends for parts I have in totes

NO interior, or drivetrain. Has the original 12 bolt rear axle but needs a new ring and pinion.

$750 Located in Santa Maria, CA 93455

Feel free to PM me or email me for any other info.

I will post more pics as I take them.

01-01-2011, 10:29 PM	#1
addicted2dunes Insane In The Membrane Join Date: Jan 2010 Location: Orcutt, CA Posts: 446	'72 GMC Jimmy For Sale...... Again...... Welp I've decided it's time for my baby to go to a new home, once again. This 72 Jimmy started life as a 4x4. I built a 2wd frame for it (shortened longbed frame) and notched it in the rear. The windshield frame has been chopped 6", the passenger side door has been started on the process of meeting even with the bed, the passenger taillight has been filled, side markers were filled, and the truck now has a 67 front clip. Basically it is a rolling body and frame. THERE IS NO RUST ON THIS VEHICLE. The rockers were starting to show signs of rust and were replaced about 5 years ago. All the front steering parts are new, but are now weathered and surface rusted. THE VEHICLE IS REGISTERED! I have always kept it up to date on it's registration but it hasn't driven in about 7 years. This would be a fun project for someone to play with, good base. If you'd like you could put a new windshield frame and passenger door and almost be back to original. Parts included: Tub Almost perfect GMC tailgate Brand new (stock) windshield 2 sets of stainless windshield trim Original owners manual All complete 67 front clip, hood needs a little work (couple dents), new front fenders, and steel grill trim (not pictured) Repair section for rear of bed on driver's side (not pictured) Shortened 2wd longbed frame All new steering included PS box Custom front bumper that hides behind roll pan Brand new red poly body mounts And some other odds and ends for parts I have in totes NO interior, or drivetrain. Has the original 12 bolt rear axle but needs a new ring and pinion. $750 Located in Santa Maria, CA 93455 Feel free to PM me or email me for any other info. I will post more pics as I take them. __________________ Cameron Gunlock Project: ALTER-K-TION ('57 GMC Quad Cab) http://67-72chevytrucks.com/vboard/s...d.php?t=393750 Last edited by addicted2dunes; 01-01-2011 at 10:43 PM.