The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 01-08-2011, 06:03 PM

Some more progress! I am very happy with how the stock air intake and clutch fan are working out. It has taken lots of mods to make it all fit and look right but in the end it will be worth it. I still need to finish off the drivers side of the fan shroud so it is sealed to the radiator and pick up a 45* tube to hook up the Mas-air sensor. Then cut and re-crimp my A/C lines, finish wiring things up, re-do my brake lines to the new proportioning valve and fuel lines. More progress to come shortly.

Kevin
LFD Inc.

01-08-2011, 06:03 PM	#1198
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's low buck truck build! Some more progress! I am very happy with how the stock air intake and clutch fan are working out. It has taken lots of mods to make it all fit and look right but in the end it will be worth it. I still need to finish off the drivers side of the fan shroud so it is sealed to the radiator and pick up a 45* tube to hook up the Mas-air sensor. Then cut and re-crimp my A/C lines, finish wiring things up, re-do my brake lines to the new proportioning valve and fuel lines. More progress to come shortly. Kevin LFD Inc. Attached Images Last edited by Rokcrln; 01-08-2011 at 06:04 PM.