[67Slider]

Replaced inner and outer tie rod ends, upper and lower ball joints, and cut one coil out of the front springs. Tried my wipers and found that I had installed the linkage backwards. Had to take the cowl off and swap the pivot arm. Buttoned her back up and parked her in the garage. I had replaced my rear springs with Jeep TJ springs awhile back. I finally got around to measuring the drop and come to find out one side is 1.75 inches higher than the other. I guess I will fork out the 100 bucks for real drop springs. I should have known better but it sounded like a great deal(the TJ springs).