[bubba327]

Good things to Know, Geezer,I had felt it snap into place , just as you described.
I will probably re-jet a size or two lower just due to the elevation here. Since I have a cam and low vacuum , I may need to change the power valve also.
I will see what the vacuum is with the new Offenhauser installed. It was 11" hg at idle the last time I checked. The install instructions say that idle vacuum divided by 2 is close to the the power valve size required. It comes with an 85, I should think a 55 or 65 to start with if the vacuum is constant after the intake installation.