A mr. gasket competition air cleaner, 9790
http://www.streetsideauto.com/p/mr-g...petition-9790/
which has a 2 inch drop base and I can't use it with my tbi, so I have to order a new raised base.
I also ordered my chrome centerbolt valve covers, spectre 5260
http://www.streetsideauto.com/p/spec...over-set-5260/
I bought a nice bowtie oil fill cap from proform/gmpp @ advance for them, but someone forgot to mention the oil fill for those covers is screw in like stock. However if you buy those covers in a kit from summit it has a push in oil fill, but the one hole is bigger, they are listed to be all 1.25 and one is 1-3/8, not 1-1/4. So I had to take back my nice oil fill cap and breather and order new ones.
Then I got a chrome PS dipstick as well, spectre 1798
http://www.streetsideauto.com/p/spec...dipstick-1798/
The cap aint round like that either, it's more flower like shaped, like the stock oil fill cap in the valve covers. So it'll match the oil fill cap I just ordered, which starts round 2.....
oil fill cap that matches the PS dipstick, spectre 4320
Amazon.com: Spectre 4320 Chrome Screw-In Oil...
I need valve cover gormmets too, spectre 5333
Amazon.com: Spectre 5333 Combination Baffled...
I decided to get a chrome pcv instead of stock, just to match the breather, plus I like these style pcv's. spectre 4284
Amazon.com: Spectre 4284 Chrome Push-In PCV Valve...
Also want to see if my block is completely drilled for mech. FP so I got me a block off plate to replace the stock, comes with bolts and gasket, but I have a gasket in case it doesn't. spectre 42463
Amazon.com: Spectre 42463 Chrome Fuel Pump...
since my air cleaner base would not work I ordered this one..
SUM -G3000B
http://www.summitracing.com/parts/SUM-G3000B/?rtype=10
my other breather trans dapt 4870
http://www.summitracing.com/parts/TRD-4870/?rtype=10
offset air cleaner stud just in case, spectre 4215
http://www.summitracing.com/parts/SPE-4215/?rtype=10
some valve cover hold downs/bolts SUM-3426
http://www.summitracing.com/parts/SUM-G3426/?rtype=10
and to match an air cleaner nut spectre 5358
http://www.summitracing.com/parts/SPE-5358/?rtype=10
I got the T-bar ones cheaper then regular hex head bolts in chrome, plus I like the wing nut or t-bars.