The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DirtyLarry · 02-09-2011, 01:08 PM

That is a good point JLT. I am still going to keep my eyes open for a newer 32 spline round 205 in case I ever decide to change to that concoction, which I think would leave room for the damper. Snj8198 would probably know for sure as that is how his is bolted together. Same with Jonessmc87 . The round 205 is a much better way to go about a NV4500 swap over the kit I used but I couldn’t find a round 205 at the time.

02-09-2011, 01:08 PM	#198
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: NV4500 swap is underway That is a good point JLT. I am still going to keep my eyes open for a newer 32 spline round 205 in case I ever decide to change to that concoction, which I think would leave room for the damper. Snj8198 would probably know for sure as that is how his is bolted together. Same with Jonessmc87 . The round 205 is a much better way to go about a NV4500 swap over the kit I used but I couldn’t find a round 205 at the time. __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram