Re: Project 67 DRGNWGN - 67 Burban!!
you go boy
Quote:
Originally Posted by kev2809
well, took a step forward and 2 back today. got the door jambs and window frame sanded down and ready to spray. after repairing a few rust spots on the 3rd door rocker area for about an hour and a half, i discovered the bottom had rust pits as well so i had to order a new one...sucks. wasted time on that one. i also found a few small rust holes on the driver side rocker, the part i didnt replace lol. that will hopefully be an easy fix in the morning, then i will spray the jambs except the 3rd door area. i should have some pics up tomorrow.
i also found out my shocks were holding me from laying out in the back, so i removed them and it went down about another 1.5"-2" plan on chopping off the top mounts and turning them and re welding them in. i did notice the driver side rear bag was a little crooked when aired out so i will be taking it back off and enlarging the hole and hopefully it will fix it.
|
__________________
check out my build "DIRTY BURB"
|