The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Kabwe · 02-17-2011, 06:01 PM

Its really not about if it looks wrong or not. The problem is the 2nd gen Camaro/Firebird clip is too wide and your wheel choices will be more limited. Most of the Advanced Design truck that I installed clips on used the 1 Gen Camaro and the 68-74 Nova because they are not as wide. I also did a 78-88 Monte Carlo clip on one and it was fine because its even more narrow than the Nova or Camaro. I just fixed a botched 70 Nova clip and done a thread and you can see it at
http://67-72chevytrucks.com/vboard/s...d.php?t=445185

I hope I helped shed some light.

02-17-2011, 06:01 PM	#2
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: Camaro/Firebird sub frames Its really not about if it looks wrong or not. The problem is the 2nd gen Camaro/Firebird clip is too wide and your wheel choices will be more limited. Most of the Advanced Design truck that I installed clips on used the 1 Gen Camaro and the 68-74 Nova because they are not as wide. I also did a 78-88 Monte Carlo clip on one and it was fine because its even more narrow than the Nova or Camaro. I just fixed a botched 70 Nova clip and done a thread and you can see it at http://67-72chevytrucks.com/vboard/s...d.php?t=445185 I hope I helped shed some light. Last edited by Kabwe; 02-17-2011 at 07:19 PM.