The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - "The Ayatollah of Rusty Hole'a 1987 SWB 6.0 4L80E

Gordonr1973 · 03-16-2011, 10:34 PM

Here are some pics of my cab dolly that I made according to some plans I found last week on the Board --- sorry I don't recall who came up with these plans but if you search "cab dolly" you will find them right away.

Two things I would tweek for a 73 - 87 cab would be to raise the rear of the dolly more so the cab sits more level and the front board needed to be wider than the recommended 38".

Other than that, it rolls around with one person pushing it, it really is an improvement over what I was using before!

I will need to strap the cab to the dolly for safety --- I just haven't done it yet.

03-16-2011, 10:34 PM	#119
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: "The Ayatollah of Rock and Rolla" 1987 Chevy 2WD SWB Here are some pics of my cab dolly that I made according to some plans I found last week on the Board --- sorry I don't recall who came up with these plans but if you search "cab dolly" you will find them right away. Two things I would tweek for a 73 - 87 cab would be to raise the rear of the dolly more so the cab sits more level and the front board needed to be wider than the recommended 38". Other than that, it rolls around with one person pushing it, it really is an improvement over what I was using before! I will need to strap the cab to the dolly for safety --- I just haven't done it yet. Attached Images __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969 Last edited by Gordonr1973; 03-16-2011 at 10:35 PM.