The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Over 25 Years Later, Finally My 71 C-10 Truck Build

hgs_notes · 03-24-2011, 11:17 PM

Finally got a couple hours out in the garage to sand some more. Yippee! Finished most of the pass side bed and door, then started the tailgate again. It might need just a bit more touch up work, but the bedside and door are looking good. Hopefully I'll finish this stage of sanding this weekend. There are just a handful of small low spots to fix so far. I think I'll do a thin coat of primer to fill the sanding scratches then move on to the finer grit.

03-24-2011, 11:17 PM	#24
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Over 25 Years Later, Finally My 71 C-10 Truck Build Finally got a couple hours out in the garage to sand some more. Yippee! Finished most of the pass side bed and door, then started the tailgate again. It might need just a bit more touch up work, but the bedside and door are looking good. Hopefully I'll finish this stage of sanding this weekend. There are just a handful of small low spots to fix so far. I think I'll do a thin coat of primer to fill the sanding scratches then move on to the finer grit. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff