Quote:
Originally Posted by Tmwoodall
So I always see the concerns about rubber hoses. Is this in regards to making the full run out of rubber, or at all? I have steel from the tank just down a bit into the frame rail so that it has some flex, same for the front. Steel all the way up to the pump, and a steel line from the outlet up to the carb in which there is another small section of rubber.
Ok or no?
|
A little bit(about 2-3") is ok just to use to make connections. It's not a good idea to use it for the entire line. The modern fuels with ethanol can eat through rubber pretty quick. Alot of new rubber lines are impregnated with silicone to keep this from happening as fast, but will still eat through over time.