|
Re: 57gmcuk
Got messed about by the sheetmetal firm so did not manage to get any metal. Finished welding the bottom corner and ground the welds down on the A pillar. Made a start on the doors. Spent a few hours playing with the bearclaw latches I have to fit. After alot of measuring and playing about have decided am going to put the claws on the cab and strikers on the door and go with blackdiesel's one piece windows subject to finding somewhere to make the glass. Will fit a release cable to open the doors under the dash. Am using door poppers for exterior use.
Making a start on repairing the lower door hinge, the previous owners repair was not to my liking.
|