The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - The Hotchkis C-10 Project

Hotchkis · 05-28-2011, 05:58 PM

Here’s our latest beauty shots of the chassis showing off some of our handiwork and our TVS kit. We’ve also stitch-welded all the chassis seams and added a lot of strengthening braces and then had it powdercoated. The rearend was swapped out for a Cup Car style full floater setup.
Now to start getting the body mounted and get the new GMPP LS3 E-Rod crate engine fired up. It’s coupled to a new GMPP 4L65E automatic overdrive transmission and controlled by a TCI control unit and paddle shifter. The engine has a new Vintage Air Frontrunner billet serpentine drive setup.

It will be ready for some serious fun on the street, track, and autocrosses very soon!

05-28-2011, 05:58 PM	#3
Hotchkis Registered User Join Date: Nov 2010 Location: Santa Fe Springs, CA Posts: 134	Re: The Hotchkis C-10 Project Here’s our latest beauty shots of the chassis showing off some of our handiwork and our TVS kit. We’ve also stitch-welded all the chassis seams and added a lot of strengthening braces and then had it powdercoated. The rearend was swapped out for a Cup Car style full floater setup. Now to start getting the body mounted and get the new GMPP LS3 E-Rod crate engine fired up. It’s coupled to a new GMPP 4L65E automatic overdrive transmission and controlled by a TCI control unit and paddle shifter. The engine has a new Vintage Air Frontrunner billet serpentine drive setup. It will be ready for some serious fun on the street, track, and autocrosses very soon!