The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Jeffs70's Custom C-10 Build

Jeffs70 · 06-05-2011, 02:47 AM

I have gained some good progress and have gotten my brakes setup just the way I am wanting them. I have went ahead and relocated my Prop Valve to my Frame and Flared my own Brake lines and bent them to a nice fit. also got my Fenderwell in on the driver side after doing some modifications to get a smooth look and take out some factory bends that do not need to be there.

Name: Prop Valve on Frame.jpg
Views: 1125
Size: 39.0 KB

Name: Prop Valve on Frame.jpg
Views: 1125
Size: 39.0 KB

Name: BrakeLines2Master3.JPG
Views: 1127
Size: 81.6 KB

Name: BrakeLines2Master4.jpg
Views: 1131
Size: 48.7 KB

Name: BrakeLines2Master5andFender.jpg
Views: 1131
Size: 43.4 KB

Name: Fenderwell1.jpg
Views: 1123
Size: 31.9 KB

06-05-2011, 02:47 AM	#103
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: Jeffs70's Custom C-10 Build I have gained some good progress and have gotten my brakes setup just the way I am wanting them. I have went ahead and relocated my Prop Valve to my Frame and Flared my own Brake lines and bent them to a nice fit. also got my Fenderwell in on the driver side after doing some modifications to get a smooth look and take out some factory bends that do not need to be there. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004