Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
Does anyone with a side fill tank have to notch the frame for clearance? Here's a few pictures of what I'm referencing. I'm also considering removing the rear brace to slide the tank inside the frame rails & shim it so the fill tube is above the top of the frame. Question: Can I swap the current rollover safety valve & return line locations? Reason: The rollover is directly under a bed floor brace & looks like it will hit it if raised up.
Top view of the tank inside the frame - mock up (for mcbassin)
From the rear:
From the side:
__________________
Bryan
'52 Bel Air 2dr HT - in pieces
'68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed
“Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin
"And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)
|