[rhodog77]

i went with a stock mechanical pump for my SBC350. I didnt want to mess with a electric setup and have to worry about pressure and a regulator. The stock mechanical pump is designed with the required cfm for the carb. The only adjusting you have to do is on the carburetor. Here is pic of the fuel pump and the stock s10 lines (at the front of the frame.) They are a little hard to see cuz of the power steering lines. I ran new fuel lines from the stock location over to the fuel pump and attached them to the top of the skid plate to keep them from moving around and out of the way of the steering setup. Let me know if you need any other pix or help.

brian