Re: Replacing high beams with regular lights? (GMC)
I don't understand your question. If you want to plug dual-filament (high/low) lamps into your high beam (inner) positions in order to have all four lit up on low beam also, then no, it's not a plug-n-play. You'd need to run a third wire for low beam, and you'll also need new 3-prong connectors. The existing high beams use a 2-prong connector -- ground and high-beam 12vdc. And as posted above, there may be legal issues running four low-beams at once.
__________________
- Mike -
1972 K20 LWB 350/350/205
RIP El Jay
|