Re: "Baby" - My 79 Blazer Project
Well I just took her down to rip the front end apart.
Brakes are starting to go and the front was getting a little wobbly.
I figured it would be a good time to order new springs, spindles and all new bushings.
So tomorrow I should have the 2" dropped springs and the 3" dropped spindles show up and be able to pick up the bushing here in town.
Wonder if it will be low enough.
The rotors feel fine, smooth with no ridges, but I am going to replace the pads while I am in there.
Everything is Beltech so it should come together nicely other than the crooked front lean I'm going to have until I can do the rear.
|