09-11-2011, 01:57 PM
|
#189
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Post your best budget mods! ($50 or less)
Quote:
Originally Posted by BOZO
I guess you could call this a repair/modification. I kept having problems years ago with the hollow rubber housing in the carrier bearing deteriorating and falling apart, resulting in the drive shaft flopping around. So the last time I replaced it, I pumped the hollow area full of silicone sealer and there has been no problems since. Caulking gun and tube of silicone sealer definitely come in under $50.
Also, vacuum port plugs slipped over your zerk fittings will keep them well protected, offering protection from rocks and rust.
|
Have you got pictures of this mod. This sounds interesting and way cheaper than the $95.00 for the carrier bearing replacement.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|