The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Post your best budget mods! ($50 or less)

Andy4639 · 09-11-2011, 07:12 PM

Yea me to. The bearings always seem fine it's the rubber boot that tears and then the bearing starts hitting the metal housing. I have a spare shaft I keep a new carrier on so when the other one messes up I just replace it. It's been awhile since the last replacement though this is a good idea. I may do this and see how it works. Thanks

I was thinking about the CCP bearing.

09-11-2011, 07:12 PM	#191
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Post your best budget mods! ($50 or less) Yea me to. The bearings always seem fine it's the rubber boot that tears and then the bearing starts hitting the metal housing. I have a spare shaft I keep a new carrier on so when the other one messes up I just replace it. It's been awhile since the last replacement though this is a good idea. I may do this and see how it works. Thanks I was thinking about the CCP bearing. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.