Quote:
Originally Posted by leddzepp
To remove the shoulder harness cover you need to "feed" the seatbelt back into it and pull the cover up 90 degrees to expose the bolt. The floor boot needs to be worked back and forth and pulled back over the seatbelts.
Snake Oyl I believe re-webs seatbelts
|
I got the shoulder belts loose as you said yesterday. Not having any luck either feeding the webbing back into the lower covers nor am i at pulling on them trying to get them out from under the bolt head. Wonder if I'm planing on rewebbing them if I should just cut them?
I'd rather not...
Just to be sure, on the floor the rubber cover should come out from under the bolt or do I need to thread the webbing back into the cover as with the shoulder harness belts?
Thanks,
Thomas