Re: Make it handle
Quote:
Originally Posted by aggie91
FOr the pan hard bar, if the mounts are long similar to the one in the picture on post #740, would it be ideal if the bar is parrallel to the axle AND the ground at ride height?
The height of the mounts you mentioned above is from the ground, correct?
|
The bar should be parallel to the ground as well as near or below the C/L of the rear end axles @ ride height to be optimum from what I've read. The lower the installed height, the better
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|