The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PD1292 · 09-28-2011, 12:00 PM

Thanks for all the comments! It keeps me motivate as well!!

I posted on the paint and body work section as was suggested and the answer is: if the primer is DTM (i think that is what he said) Direct to metal, then you can prime over the small blow threws. Mine is not so I will have to re-apply the etch primer and then follow up with some build primer and continue to block.

09-28-2011, 12:00 PM	#9
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: 72Jimmy 1st attempt at rust removal Thanks for all the comments! It keeps me motivate as well!! I posted on the paint and body work section as was suggested and the answer is: if the primer is DTM (i think that is what he said) Direct to metal, then you can prime over the small blow threws. Mine is not so I will have to re-apply the etch primer and then follow up with some build primer and continue to block.