The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 11-15-2011, 07:48 PM

my 66 had a 700r4 in it, after the 3 speed manual, but before the 4l80e haha

It will definitely fit, as the overall profile of the 700r4 isnt huge. If you haven't worked with the 700r4 before, just make sure you have the TV Bracket mounted onto your carb. Without it the trans will be useless, as the 700 relies on the TV cable for operation...without it it will melt down.

I'd also suggest a good tranny cooler if you don't have one.

11-15-2011, 07:48 PM	#5
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 700R4 replacing 3 speed my 66 had a 700r4 in it, after the 3 speed manual, but before the 4l80e haha It will definitely fit, as the overall profile of the 700r4 isnt huge. If you haven't worked with the 700r4 before, just make sure you have the TV Bracket mounted onto your carb. Without it the trans will be useless, as the 700 relies on the TV cable for operation...without it it will melt down. I'd also suggest a good tranny cooler if you don't have one. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD