Quote:
Originally Posted by Crash_OK
Thanks Dunenutt, I have already ordered master kits for both axles (from Randy's), along with a Ring and Pinion for the 12 bolt.
Just to make sure I am clear, you would wire wheel and then paint with POR? Would you also you POR on the axles and springs?
|
Yes, clean them up as good as possible with a wheel, use the prep spray, and paint it as per instructions. Sandblasting is ok, quick but expensive.If you do have them blasted, you can down grade from the white blast. I would do the springs with chassis black ( made by POR) , as the POR15 may crack from bending.