Quote:
Originally Posted by Groyd
Could you PLEASE explain how you did this? Or show a pic?
MG
|
Sorry it's taken me this long to get this for you. The top picture is the type light I'm referring to used, and in the second you see the frame minus the one side I used. I measured the passenger door and then cut the new frame. The drivers door has a single screw about the latch then 2 screws middle ways down. The single one holds the top of the track to the door and the bottom two has a flat piece of metal which I took off and welded to the new track. Just a task of measuring and a little welding. Let me know if you need more info. I should have took a picture of it before I put it in.